How to Root AT&T Samsung Galaxy Note N7000B – Easy Tutorial

Just after hours of AT&T starts shipping out the Samsung Galaxy Note, here arrives the Rooting procedure which will help you to root the devices effortlessly without harming the device in whatsoever manner. To make things simple, we have ensured that each and every step mentioned in this article is utterly clear and simple which ensures you to follow each step easily. Please be informed that after rooting the device, the warranty of the device will be void and the only way with which you can regain the lost warranty is by applying the official firmware again which we will be checking out very shortly on how you can update the same.

Disclaimer: We should not be held responsible in any manner in whole or in parts if anything wrong happens to your device after following the instructions though it is very unlikely if you follow the instructions which are mentioned in this article carefully.

To make things simple, we will first check out on what are the list of pre requisites you need to follow and then next up in the next page we have summed up the detailed instructions on how to apply this Rooting procedure in your Galaxy Note device powered by at&t. Please note that this procedure will only work on the phones which are locked with the AT&T and not to the phones which are of SIM Free devices like N7000 etc.

List of Pre Requisites:
Backing up all the data present in your phone is a must and the same can be backed up with the help of below mentioned steps. Please note that you should backup the data using the PC Suites as there is a possibility that the phone may not get detected in your PC Suite.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

Enable the USB Debugging Mode in your phone from the path “Settings > Applications > Development > USB debugging. Ensure that the USB Debugging option is ticked as shown in the below screen capture.

Minimum battery level present in your phone should be 60% so as to ensure that the device doesn’t get turned Off in the middle of firmware update.

Also, additionally ensure that all the Antivirus suites in your phone are completely removed as these tools may interrupt the process of rooting.

So assuming that you have followed all the instructions, you can now head to the next page where we have summed up a detailed guide on how to root your device with the help of a simple tutorial.

Procedure to Root AT&T powered SAMSUNG Galaxy Note:

• Download Samsung Galaxy note USB Drivers Package in your computer to install the same. Up next, you need to Download Rooting TAR file for Note from here to your computer along with the Odin.
• Open the Odin executable file in your computer and turn Off your SAMSUNG Galaxy Note so as to enter the device in the Download Mode.

• The download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• Once the Note is turned ON in the download mode, with the help of USB Cable connect the phone with the computer while keeping Odin opened in your computer. As soon as drivers are installed successfully, the ID : COM section in odin will turn yellow after which proceed to the next step to select the files.

• In Odin, click on “PDA”, select the file as “pda.tar” and then click on “Start” to start the process of rooting.

• Once the device is rooted successfully, the phone will be rebooted. Once you see the home screen, remove the connected USB cable and you need to remove the connected USB Cable to turn off the phone so as to enter the Note in the recovery mode.
• The recovery mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In recovery mode, select options Wipe data/factory reset and also you need to select Wipe Cache partition and also you need to select the option of “Clear Dalvik Cache” after which you need to reboot your device by selecting reboot system now after which all the cache files will get deleted.

Tip: just in case if the process gets interrupted at any point of time then you need to reapply the whole procedure again from the start after re inserting the battery.

After this, you need to Download and install the latest version of Superuser app from Android Market Place.

Congratulations, you have now successfully rooted your Samsung Galaxy Note. Let us know in the comments section just in case if you have any issues in the comments section as we will try our level best to address the same at the earliest.